[{"data":1,"prerenderedAt":27},["ShallowReactive",2],{"content-dew-point-en":3},{"about":4,"steps":7,"faq":11},[5,6],"Warm air holds more water vapour than cold air. When room air cools down at a cold outside wall, a window reveal or behind a wardrobe, the relative humidity right at the surface rises. At the dew point, water condenses; according to DIN 4108-2, mold grows as soon as a surface stays at 80 % relative humidity. The calculator shows both limits for your room air.","If you also enter the measured surface temperature, it rates the spot: no risk, mold risk or condensation. With the outdoor temperature it also calculates the surface’s temperature factor f_Rsi and the value it would need under these conditions. It uses the Magnus formula (Sonntag constants) right in your browser.",[8,9,10],"Enter the room temperature and relative humidity, e.g. from a hygrometer.","Read the dew point and mold limit: surfaces colder than the mold limit are at risk.","Optional: measure the coldest spot of the wall with an infrared thermometer and enter it together with the outdoor temperature to see the risk and temperature factor.",[12,15,18,21,24],{"q":13,"a":14},"What is the dew point?","The temperature to which air has to cool for its water vapour to condense. At 20 °C and 50 % relative humidity it is about 9.3 °C – so a surface at 9 °C gets wet.",{"q":16,"a":17},"Why is the mold limit higher than the dew point?","Mold does not need liquid water. According to DIN 4108-2 it is enough for a surface to stay at 80 % relative humidity for a longer time. At 20 °C and 50 % room humidity that happens at a surface temperature of 12.6 °C.",{"q":19,"a":20},"What does the temperature factor f_Rsi mean?","f_Rsi = (θsi − θe) \u002F (θi − θe) describes how warm an inside surface stays relative to the inside and outside temperature. DIN 4108-2 requires at least 0.70 at thermal bridges, designed for 20 °C inside, 50 % humidity and −5 °C outside. If your conditions need a higher value, lowering the humidity helps most.",{"q":22,"a":23},"What humidity is good for living spaces?","Typically 40 to 60 % at around 20 °C. The colder the outside walls, the lower the humidity should be in winter. How much water the air holds is shown by the absolute humidity in g\u002Fm³.",{"q":25,"a":26},"How accurate is the calculation?","Between −45 and 60 °C the Magnus formula deviates only by tenths of a degree from more exact methods. The measurement error is usually larger: cheap hygrometers are often 5 % off. To convert a temperature to Fahrenheit, use the [[unit-converter]].",1794509134484]