[{"data":1,"prerenderedAt":27},["ShallowReactive",2],{"content-resistor-color-code-en":3},{"about":4,"steps":7,"faq":11},[5,6],"Through-hole resistors show their value as colored bands. The calculator translates the bands into ohms, tolerance and – with a sixth band – the temperature coefficient, and turns a value such as 4k7 into the matching colors. It also shows the range the real resistance may lie in and the smallest E series the value belongs to.","With 4 bands the first two are digits, the third is the multiplier (power of ten) and the fourth the tolerance. With 5 and 6 bands there are three digits; the sixth band is the temperature coefficient. A resistor with only 3 bands has no tolerance band and thus ±20 %. The colors follow IEC 60062:2016.",[8,9,10],"Choose “Colors → value” and set the number of bands.","Pick the color of each band from left to right; value, tolerance and range appear right away.","Under “Value → colors” enter a value such as 4k7, 220 or 1M and get the bands for 4, 5 or 6 bands.",[12,15,18,21,24],{"q":13,"a":14},"Which side do I read from?","The tolerance band (often gold or silver) usually sits a little apart at the right end; read from the other side. Gold and silver are never the first band. If one direction gives a value that is not in any E series, the other one is usually right.",{"q":16,"a":17},"What do gold and silver mean as third or fourth band?","As a multiplier gold means ×0.1 and silver ×0.01 – this is how values below 10 Ω are marked, e.g. yellow-violet-gold for 4.7 Ω. As the tolerance band they stand for ±5 % and ±10 %.",{"q":19,"a":20},"Why does grey show ±0.01 %?","Since IEC 60062:2016 grey stands for ±0.01 %, orange for ±0.05 % and yellow for ±0.02 %. Older precision resistors sometimes still use grey for ±0.05 %, and some high-voltage resistors use yellow and grey instead of gold and silver.",{"q":22,"a":23},"What is the E series?","Resistors only come in standardized values, the E series (E6, E12, E24, E96 …). The finer the series, the tighter the tolerance. Find the nearest standard value for any value with the [[e-series-finder]].",{"q":25,"a":26},"Which resistor do I need for my LED?","The [[led-resistor]] calculates it. The relations between voltage, current, resistance and power are shown by the [[ohms-law]] calculator.",1794509136911]