[{"data":1,"prerenderedAt":27},["ShallowReactive",2],{"content-smd-resistor-code-en":3},{"about":4,"steps":7,"faq":11},[5,6],"SMD resistors carry a short marking instead of color bands. With 3 digits the first two are the value and the third is the number of zeros (472 = 4700 Ω); with 4 digits there are three value digits (4702 = 47 kΩ). An R stands for the decimal point (4R7 = 4.7 Ω), 000 for a zero-ohm jumper.","Precision ±1 % resistors in small packages often use the EIA-96 code: two digits as an index into the E96 series and a letter as the multiplier, e.g. 01C = 100 · 100 = 10 kΩ. The calculator recognizes all of these and shows the other way round how a value is marked.",[8,9,10],"Type the marking, for example 472, 4702, 4R7 or 01C; upper or lower case does not matter.","Read the resistance, the recognized marking system and the typical tolerance.","Under “Value → marking” see how a value such as 10k looks as a 3-digit, 4-digit and EIA-96 code.",[12,15,18,21,24],{"q":13,"a":14},"What does 103 on an SMD resistor mean?","10 and three zeros = 10,000 Ω = 10 kΩ. Likewise 101 = 100 Ω, 472 = 4.7 kΩ and 105 = 1 MΩ. Note: on capacitors the same code means picofarads – use the [[capacitor-code]] for those.",{"q":16,"a":17},"How do I recognize EIA-96?","EIA-96 always has two digits and a letter, e.g. 01C or 68X. The digits 01 to 96 count through the E96 series (01 = 100, 02 = 102 … 96 = 976), the letter is the multiplier: Z ×0.001, Y\u002FR ×0.01, X\u002FS ×0.1, A ×1, B\u002FH ×10, C ×100, D ×1000, E ×10,000, F ×100,000.",{"q":19,"a":20},"What tolerance does the resistor have?","The marking does not encode the tolerance directly. ±5 % is common for 3-digit codes and ±1 % for 4-digit and EIA-96 codes, so the calculator only shows a typical value. The datasheet or the reel label is binding.",{"q":22,"a":23},"Why do some resistors have no marking at all?","Packages such as 0402 and smaller are too small for a marking. Then only measuring or the reel label helps. Find the nearest standard value for a measured value with the [[e-series-finder]].",{"q":25,"a":26},"How do I read through-hole resistors?","By their color bands – the [[resistor-color-code]] handles that.",1794509137047]