About this tool
Aperture, shutter speed and ISO can be traded against each other: opening up one stop allows half the time, doubling the ISO does too. The calculator takes a metered exposure, computes the exposure value (EV) and, given two new values, finds the third – e.g. the shutter speed when you stop down from f/8 to f/16.
On film this trade stops working for long exposures: due to reciprocity failure (the Schwarzschild effect), film needs considerably longer above about one second. Pick a film and the calculator corrects the time with Ilford’s formula t^p. The table lists all equivalent combinations at your ISO.
How it works
- Enter the metered exposure: aperture, shutter speed (e.g. 1/125 or 30) and ISO.
- Choose what to calculate and set the other two new values.
- For long exposures on film, pick your film or a custom exponent and read the corrected time.
Frequently asked questions
What is the exposure value (EV)?
A number for all aperture and shutter combinations that give the same exposure: EV = log₂(N² / t) at ISO 100. f/1 at 1 s is EV 0, each step up halves the light. A sunny day is about EV 15, a lit interior EV 6 to 8.
What is reciprocity failure?
During long exposures film becomes less sensitive than the math suggests. A metered second stays a second, but with Ilford HP5 Plus 10 s become about 20 s and 60 s more than 3 minutes. Digital sensors do not have this effect.
Why are only Ilford films preset?
Ilford publishes an exponent p for the formula t^p for its films. Kodak, Fujifilm and others publish tables or correction curves instead. For those films, enter a custom exponent that matches the table values.
How do I calculate with ND filters?
An ND filter extends the time by its number of stops. The easiest way is the ND Filter Calculator; you can enter the extended time here for the film correction.