Flash Guide Number Calculator

Aperture, flash range or guide number for manual flash – with ISO and power settings from 1/1 to 1/128, in metres or feet.

Runs locally in your browser
Aperture
f/12
Effective guide number · at this ISO and power60

By power setting

PowerAperture
1/1f/12
1/2f/8.5
1/4f/6
1/8f/4.2
1/16f/3
1/32f/2.1
1/64f/1.5
1/128f/1.1

Guide number = distance × f-number at ISO 100. Double the ISO multiplies it by √2 (≈ 1.41), half the power divides it by √2. Manufacturers often quote the guide number at the longest zoom position – at a wide zoom it is lower. Bounce flash and diffusers cost 1–2 stops.

About this tool

The guide number (GN) describes how powerful a flash is: guide number = distance × f-number at ISO 100 and full power. A flash with guide number 40 correctly exposes a subject 5 m away at f/8. When you flash manually – without TTL automation – you use it to work out the right aperture or the maximum range.

The calculator accounts for the ISO setting and power levels from 1/1 to 1/128 and works in every direction: aperture from distance, range from aperture or the guide number from a test shot. A table shows the result for all power settings.

How it works

  1. Choose whether to calculate aperture, distance or guide number, and the unit (metres or feet).
  2. Enter the guide number from the data sheet, the ISO and the power setting.
  3. Enter the distance or aperture and read the result; the table lists all power levels.

Frequently asked questions

How are ISO and guide number related?

The guide number grows with the square root of the ISO: at ISO 400 it is twice as large as at ISO 100, so the range doubles. Halving the flash power works the other way and divides the guide number by √2.

Why doesn’t my flash reach its guide number?

Manufacturers usually quote the guide number at the longest zoom position of the reflector (e.g. 105 mm or 200 mm). At a wide setting the light spreads out and the guide number drops considerably. It also assumes a room with reflecting walls; outdoors you often lose a third to half a stop.

How do I measure the guide number myself?

At ISO 100 and full power, photograph a grey card at a known distance with several apertures. The aperture of the correctly exposed frame times the distance is the guide number. Set “Guide number” as the value to calculate.

Does the guide number apply to bounce flash?

No, it applies to direct light. Via a ceiling or wall the light path is longer and light is lost – expect 1 to 2 stops less. How aperture, shutter speed and ISO trade against each other is shown by the Exposure & Reciprocity Calculator.