About this tool
Before every trip to the DIY store the same question comes up: how much paint or how many rolls of wallpaper do I need? The calculator takes the length, width and height of a rectangular room, works out the wall area, subtracts windows and doors and turns that into litres and buckets – with the ceiling if you like.
For wallpaper it counts strips instead of square metres: how many strips go around the room, how long one strip is with pattern repeat and trim, and how many whole strips one roll gives. That avoids guesswork about waste at the checkout. Everything runs in your browser.
How it works
- Choose paint or wallpaper and enter the room’s length, width and height.
- For paint: enter the window area, coverage from the label, number of coats and bucket size. For wallpaper: enter the width of doors, roll size and pattern repeat.
- Read the amount in litres and buckets or in rolls; the table shows the values in between.
Frequently asked questions
How much paint do I need per square metre?
Emulsion paint usually covers 6 to 8 m² per litre and coat, so about 125 to 170 ml/m². Two coats double that. Absorbent or rough surfaces need more – that is what the extra is for.
Should I subtract windows and doors?
Yes, large areas are worth it: a door is about 1.8 m², a normal window 1.2 to 2 m². You can ignore small openings, they make up for losses at edges.
What is the pattern repeat of a wallpaper?
The distance after which the pattern repeats. For neighbouring strips to match, up to one repeat per strip can be wasted. The calculator therefore adds it to every strip. Wallpaper without a repeat (0) is the most economical.
Why do I only subtract doors for wallpaper?
Above and below windows you still need pieces of strips that often do not fit from leftovers. So only floor-to-ceiling openings such as doors and French windows are subtracted – deliberately a little generous.
What about the floor?
Calculate tiles, laminate and parquet with the Tile & Flooring Calculator. Whether a cold outside wall could get moldy after renovating is shown by the Dew Point & Mold Risk Calculator calculator.