Stair Calculator

Number of steps, rise, going and pitch of a straight stair from the floor height – checked against the step rule and DIN 18065.

Runs locally in your browser
Building
Rise h / Going a
17.2 / 28.6 cm
16 risers · 15 treads
Rise h17.19 cm
Going a28.63 cm
Total run429 cm
Pitch31.0°
Step rule 2h + a · ideal 63 cm, 59–6563.0 cm
Safety rule a + h · ideal 46 cm45.8 cm
Comfort rule a − h · ideal 12 cm11.4 cm

DIN 18065 for this building: rise 14–20 cm, going 23–37 cm. Measure from finished floor to finished floor. Plan at least 2 m headroom above the pitch line and check the landing.

Alternatives

nha2h + a°
1321.220.763.046
1419.623.763.040
1518.326.363.035
1617.228.663.031
1716.230.663.028
1815.332.463.025
1914.534.163.023
2013.835.563.021
2113.136.863.020

About this tool

A good stair starts with the floor-to-floor height: it is divided into a whole number of equal rises. The going follows from the step rule 2h + a = 63 cm, which matches an adult’s average stride. The calculator chooses the number of risers whose rise is closest to 17 cm and shows the run and pitch.

If space is limited, enter the available run; then the going is derived from it and the number of risers with the best step rule is chosen. All variants are listed in a table, checked against the DIN 18065 limits for the chosen building type. Everything is calculated in your browser.

How it works

  1. Measure the floor-to-floor height from finished floor to finished floor and enter it in cm.
  2. Optional: enter the available run or set the number of risers yourself, and choose the building type.
  3. Read the rise, going, run and pitch; in the table you can choose another number of risers.

Frequently asked questions

What is the step rule?

Two rises plus one going should add up to about 63 cm (2h + a = 63, usually 59 to 65 cm). Then the stair matches a natural stride. In addition there is the safety rule a + h = 46 cm and the comfort rule a − h = 12 cm.

Which dimensions does DIN 18065 require?

For required stairs in homes with at most two flats, the rise is 14 to 20 cm and the going 23 to 37 cm; in other buildings 14 to 19 cm and 26 to 37 cm. Stairs not required by building law may have a rise up to 21 cm and a going from 21 cm. The German state building codes are what counts legally.

Why is there one tread less than risers?

The top riser ends at the upper floor, which itself serves as the last tread. A stair with 16 risers therefore has 15 treads – and the run is 15 × the going.

Which pitch is comfortable?

Stairs in homes are usually between 30 and 37°. Flatter feels generous but needs more space; steeper than about 45° turns into a space-saving stair or ladder.

What else do I need to build stairs?

Calculate a concrete foundation for outdoor steps with the Concrete, Screed & Mortar Calculator, coverings for the treads with the Tile & Flooring Calculator.