Capacitor Code Calculator

What does 104 on a capacitor mean? Decode capacitor markings to pF, nF and µF – with tolerance letter and voltage code – or find the code for a value.

Runs locally in your browser
Examples
Capacitance
100 nF
pF100,000 pF
nF100 nF
µF0.1 µF

How it was read: 3-digit code: two digits plus the number of zeros, in pF

Value → code

F
3-digit code472
Letter code4n7

Common values

About this tool

Ceramic and film capacitors are too small for a written-out value, so they carry a code. The most common is the 3-digit code: the first two digits are the value, the third is the number of zeros, all in picofarads. So 104 means 10 and four zeros = 100,000 pF = 100 nF.

The calculator also reads tolerance letters (J = ±5 %, K = ±10 %, M = ±20 %), EIA voltage codes such as 2A (100 V), the letter code 4n7 and plain numbers such as 47 (pF) or .1 (µF). The result is shown in pF, nF and µF side by side; the other way round you get the code for a value.

How it works

  1. Type the marking, for example 104, 103K or 2A473J, or pick an example.
  2. Read the capacitance in pF, nF and µF, plus tolerance and rated voltage if coded.
  3. Under “Value → code” enter a capacitance such as 4n7 or 0.1µ and get the 3-digit code and the letter code.

Frequently asked questions

What does 104 on a capacitor mean?

104 stands for 10 · 10⁴ pF = 100,000 pF, i.e. 100 nF or 0.1 µF. Likewise 103 = 10 nF, 473 = 47 nF and 105 = 1 µF.

What do 8 and 9 as the third digit mean?

They mark values below 10 pF: 9 means ×0.1 and 8 means ×0.01. So 479 is 4.7 pF and 108 is 0.1 pF.

What does the letter after the number mean?

Usually the tolerance: F ±1 %, G ±2 %, J ±5 %, K ±10 %, M ±20 % and Z +80/−20 %. B, C and D give an absolute tolerance in pF and appear on small values below 10 pF.

And what does 2A in front of the code mean?

An EIA voltage code: 1C = 16 V, 1E = 25 V, 1H = 50 V, 2A = 100 V, 2E = 250 V, 2J = 630 V. So 2A104J is a 100 nF capacitor with ±5 % rated for 100 V.

How do I read SMD resistors?

Use the SMD Resistor Code Calculator. Common standard values are shown by the E Series Finder, and how long an RC circuit takes to charge is calculated by the RC / LC Filter Calculator.