RC / LC Filter Calculator

Cutoff frequency and time constant of RC and RL low-pass and high-pass filters, resonant frequency of LC circuits – with frequency response.

Runs locally in your browser
Ω
F
Hz
Fill in exactly two fields – the third is calculated.
Cutoff frequency
1.592 kHz
Resistance R · given1 kΩ
Capacitance C · given100 nF
Time constant τ100 µs

After τ a capacitor is charged to 63 %, after 5 τ to over 99 %.

Frequency response

−0 dB−10 dB−20 dB−30 dB−40 dB16 Hz160 Hz1.6 kHz16 kHz160 kHz
Hz

About this tool

An RC network of a resistor and a capacitor is the simplest filter: as a low-pass it lets low frequencies through, as a high-pass the high ones. At the cutoff frequency fc = 1 / (2π · R · C) the signal is attenuated by 3 dB; beyond it, it falls by 20 dB per decade. An RL network behaves the same with fc = R / (2π · L).

An LC tank of a coil and a capacitor resonates at f0 = 1 / (2π · √(L · C)). The calculator solves each formula for the missing value, shows the time constant or characteristic impedance and, for RC and RL networks, the frequency response with gain and phase at any frequency.

How it works

  1. Choose RC, RL or LC.
  2. Fill in two of the three fields, for example R = 1k and C = 100n; the third is calculated.
  3. Choose low-pass or high-pass and optionally enter a frequency to read gain and phase there.

Frequently asked questions

How do I calculate the cutoff frequency of an RC filter?

With fc = 1 / (2π · R · C). For 1 kΩ and 100 nF that is about 1.59 kHz. The calculator also solves the formula for R or C when you enter the desired cutoff frequency.

What is the time constant τ?

τ = R · C (or L / R) tells how fast an RC network responds to a step: after τ the capacitor is charged to about 63 %, after 5 τ to over 99 %. Cutoff frequency and time constant are linked by fc = 1 / (2π · τ).

Why −3 dB at the cutoff frequency?

There reactance and resistance are equal; the voltage drops to 1/√2 ≈ 70.7 %, the power to half. The phase is −45° for the low-pass and +45° for the high-pass.

What does the characteristic impedance of a tank circuit tell me?

√(L/C) is the reactance of the coil and the capacitor at resonance. Together with the loss resistance it determines the quality factor. For antennas and matching networks there is the Smith Chart & L-Network Matching calculator.

Which parts should I use?

Find the nearest standard value for the calculated R or C with the E Series Finder; the Capacitor Code Calculator reads a capacitor’s marking.