Series & Parallel Calculator

Total value of resistors, capacitors or inductors in series or parallel – and the best pair of standard values for any target value.

Runs locally in your browser
Ω
Ω
Total
687.5 Ω

Reciprocals add up: 1/X = 1/X₁ + 1/X₂ + …

Combine standard values

Ω
PartsTotalDeviation
10 kΩ ∥ 10 kΩ5 kΩ0 %
47 kΩ ∥ 5.6 kΩ5.004 kΩ+0.08 %
4.7 kΩ + 330 Ω5.03 kΩ+0.6 %
4.7 kΩ + 270 Ω4.97 kΩ-0.6 %
18 kΩ ∥ 6.8 kΩ4.935 kΩ-1.29 %
56 kΩ ∥ 5.6 kΩ5.091 kΩ+1.82 %

Best ways to reach the target with one or two standard values. + = Series, ∥ = Parallel

About this tool

In series, resistors and inductors add up; in parallel their reciprocals add up – so two equal resistors in parallel give half the value. Capacitors work the other way round: in parallel the capacitances add up, in series the reciprocals. The calculator takes any number of values and shows the total.

Below it, it searches the best combinations of one or two standard values of the chosen E series, in series or in parallel, for a target value. That way you find, for example, 5 kΩ from resistors that are in your parts box.

How it works

  1. Choose resistors, capacitors or inductors and whether they are connected in series or in parallel.
  2. Enter the values, e.g. 1k and 2k2; “Add value” adds more parts. The total appears right away.
  3. Under “Combine standard values” enter a target value and the E series to see matching combinations of one or two parts.

Frequently asked questions

How do I calculate resistors in parallel?

1/R = 1/R₁ + 1/R₂ + … For two resistors it is simpler: R = R₁ · R₂ / (R₁ + R₂). The total is always smaller than the smallest single resistor.

Why is it the other way round for capacitors?

Capacitors in parallel act like one capacitor with a larger plate area, so the capacitances add up. In series the plate distance effectively grows and the capacitance drops. The voltage rating rises, but the voltage only splits evenly with equal capacitances.

Does this apply to inductors too?

Yes, like resistors – as long as the inductors are not magnetically coupled. If they sit close together or share a core, mutual inductance comes in, which the calculator does not include.

How much power can the combination take?

With equal resistors the power splits evenly, with unequal ones it does not: in series the larger resistor takes the bigger share, in parallel the smaller one. Calculate the power at a single resistor with the Ohm’s Law Calculator calculator; for voltage dividers there is the Voltage Divider Calculator.