E Series Finder

Nearest standard value in the E6, E12, E24, E48, E96 or E192 series for any resistor, capacitor or inductor value – with deviation and all series values.

Runs locally in your browser
Ω
Below
4.7 kΩ
-6 %
Nearest
5.1 kΩ
+2 %
Above
5.1 kΩ
+2 %

Not in any E series.

All series

SeriesNearestDeviationTyp. tolerance
E34.7 kΩ-6 %±40 %
E64.7 kΩ-6 %±20 %
E124.7 kΩ-6 %±10 %
E245.1 kΩ+2 %±5 %
E485.11 kΩ+2.2 %±2 %
E964.99 kΩ-0.2 %±1 %
E1924.99 kΩ-0.2 %±0.5 %

Values of E24

1 kΩ1.1 kΩ1.2 kΩ1.3 kΩ1.5 kΩ1.6 kΩ1.8 kΩ2 kΩ2.2 kΩ2.4 kΩ2.7 kΩ3 kΩ3.3 kΩ3.6 kΩ3.9 kΩ4.3 kΩ4.7 kΩ5.1 kΩ5.6 kΩ6.2 kΩ6.8 kΩ7.5 kΩ8.2 kΩ9.1 kΩ

About this tool

Resistors, capacitors and inductors do not come in every possible value but in the standardized E series of IEC 60063. The E series finder shows the nearest standard value below, above and closest to any value – with the deviation in percent.

A table compares all series from E3 to E192 with their typical tolerance, and below it you see all values of the selected series in the matching decade. Enter values with a prefix, e.g. 5k, 3.3n or 220.

How it works

  1. Enter the value you need, for example 5k for 5 kΩ, and choose the unit.
  2. Pick the E series you use (for resistors usually E12 or E24, E96 for precision).
  3. Read off the nearest standard value or compare in the table how close the other series get.

Frequently asked questions

What do E6, E12, E24 and E96 mean?

The number tells how many values a decade has. E12 has 12 values from 1.0 to 8.2 that repeat in every power of ten (10 Ω, 12 Ω … 82 Ω, 100 Ω …). The values are spaced so that, with the series’ typical tolerance, they cover the whole range.

Which tolerance belongs to which series?

Typically E6 ±20 %, E12 ±10 %, E24 ±5 %, E48 ±2 %, E96 ±1 % and E192 ±0.5 % or better. Today E12 and E24 resistors are mostly available with ±1 % as well.

Why are the E24 values not spaced exactly evenly?

E3 to E24 predate standardization and follow the formula 10^(i/n) only roughly – e.g. 2.7 instead of 2.61 or 4.7 instead of 4.64. From E48 on, the values are the formula rounded to three digits; the only exception is 9.20 in E192.

How do I get closer to a value that is not in the series?

With two resistors in series or parallel. For voltage dividers the Voltage Divider Calculator finds the best combination of standard values automatically.

How do I tell the value of a resistor?

For through-hole resistors from the color bands – the Resistor Color Code translates them and also shows which E series the value belongs to.